FRP Sheet

InductoFurnace is a leading name in the market having vast experience in manufacturing FRP sheet and Mica sheets. Our variety of available options will definitely meet your requirements.

This sheet is an amalgamation of polyester and epoxy, use for coil inter-turn insulation, furnace crucible door, thermal insulation and coil spacers at variegated places. It has the capacity to withstand up to 200°c temperature.

Features:

• Specific gravity—1.8 – 1.9
• Electrical strength—14kv/mm
• Martens heat distortion temperature is minimum160 °C
• Tensile strength, N/mm minimum of 250
• Insulation resistance after 24hrs Immersion in water MΩ Min. 10,000

Immersion—0.15

MICA SHEETS

These sheets are manufactured using natural muscovite mica combined with a calculated ratio of resin in dense, compact and rigid plates by using the multiple hydraulic pressing technique under high temperature. These plates have high resistance to pressure and heat because of the natural cohesive forces present between the mica platelets and the intermolecular strength of the thermosetting binder. These fine quality sheets are applicable in yoke insulation, coil bottom & top insulation, coil inter-turn insulation, thermal and electrical insulation at multiple places for induction machines.

Features:

• Fire resistance property
• Non-toxic under increased temperature
• High tensile strength
• Pholgophit Mica can withstand up to 900 °C temperature
• Strength 22 KV/mm
• high dielectric strength
• high voltage endurance
• good electrical and mechanical properties
• high thermal stability
• Density 1.8 gcm
• Dielectric Strength 22 KV/mm
• Maximum operating temperature 200 °C

MICA FLEXIBLE

It is widely preferred for lining inducting furnace owing to its high tensile strength and high fire resistance features. Also, it has strong resistance capacity to acid & alkali and radiation. Pholgophit Mica can withstand up to 900 °C temperature.

Technical specifications:

• Standard Size: 1000mm x 25 Mtr
• Standard color: Brown
• Mica roll sheets have a high dielectric strength
• High thermal stability
• Non-toxic under exorbitant temperature
• Excellent flexibility
• Strong voltage endurance
• Good electrical and mechanical properties

Technical properties:

• Normal thickness 0.5mm
• Glass Content 60±5 g/mm²
• Mica 60±5%
• Bond Content 35±2.5%,
• Tensile Strength >120 psi (MPA)
• Dielectric Strength >1.4 kv/Layer
• Bonding Strength 2300 lbs
• Thermal Conductivity 0.2-0.25 W/m°C
• Flame Resistance V-0 class
• Stiffness >90 N/m

For product related queries and order placing, you can call us on the mentioned phone number You can even send emails to let us know your specified products requirements, our product managers will assist you and guide you in making the best deals