Syndanio Sheet
The water-cooled copper coil, and the boards, sheets and tapes that insulate it.
- 3mm to 75mm
- Normal thickness range
- 350°C
- Continuous temperature
- 1050 Kg/cm²
- Compressive strength
- 1050 x 1200mm
- Sheet size
Syndaniyo sheet is composite material made from cement and fiber for reinforcement, this fiber can be of sabestos or non asbestos as per requirement. Application: Topblock of induction furnace, plateform of induction furance, front, back and side wall covers of induction furnace, spacer to maintain gap in induction coil turns, any structural part in high temperature application, Heat Barriers, Backup insulation and billet heater box
Normally available from 3mm to 75mm thickness- 1050x1200mm, Continues temp-350°c, Density- 1.95gms/cc, Water absorption-13%, Tensile strength-180 kgf/cm², High density Heat resistant/ arc board, Used for crucible top block-furnace frontback door, washer,coil spacers, coil segment etc
Assured quality components by our own manufacturing
Technical Specifications
Parameter Syndanio 350
Density (Kg / m3) 1900
Compressive Strength (Kg / cm2) 1050
Shear Strength (Kg/Cm2) 280
Max. Continuous Operating Temperature Dielectric strength at 90 °C 350º C
Transverse 1KV/mm
Surface 3KV/min
Thermal Conductivity of boards thickness 10 mm at 350ºC (W/M °C) 0.63
Remark Commercial Mineral Fiber Grade
How to order
- Tell us what you needCall or email with the furnace make, capacity and your specification.
- We confirmOur team guides you on the right spare and shares specifications and prices.
- DeliveryDelivered at your location within a few working days. Bulk orders accepted.
